Scales Basic P058 200g x 0.01g SC210

Information

Calibration

This scale does not require calibration, but if it takes a knock and you think it it is not reading accurately, you can use the instructions below to perform calibration. You will need a 200g calibration weight.

1. Turn the scale on.
2. Wait for the display to show 0.00g.
3. Press and hold the Units button until the display flashes CAL.
4. Press the Units button again and the display will flash 200.00g.
5. Place a 200g calibration weight in the centre of the weighing tray.
6. The display will flash PASS and your scale is now calibrated.

Information

• Keeping any sized calibration weight on hand will allow you to periodically test your scale for accuracy. We recommend keeping a 200g calibration weight stored with your scale so you can perform recalibration if required.
• Do not exceed the scales maximum capacity.
• Avoid exposure to extreme heat or cold. Scales perform best at room temperature. If temperatures have changed dramatically, recalibration may be necessary.
• Calibration and adjustment are performed at the factory. While recalibration is not generally necessary, it can be performed with the correct weight by following the instructions included with your scale.
• Before performing calibration, allow your scale to warm up for 30 - 60 seconds.
• Store your scale in a clean, dry location. Dust, dirt, and moisture can accumulate on the weighing sensors and electronics causing innaccuracy or malfunction.
• Always weigh on a flat and level surface free from vibration and drafts. The corner of a room is usually the most stable.
• Gently apply items to be weighed. Do not drop items onto the weighing platform.
• Avoid dropping your scale. Warranty does not cover physical damage or overloading.
• Check the batteries first if you are having any trouble with your scale. This simple step can remedy many scale issues.