Scales Basic P089 200g x 0.01g SC212

Information

Calibration

This scale does not require calibration, but if it takes a knock and you think it it is not reading accurately, you can use the instructions below to perform calibration. You will need a 200g calibration weight.

1. Turn the scale on.
2. Wait for the display to show 0.00g.
3. Press and hold the M button until the display flashes CAL.
4. Press the M button again and the display will flash 200.00g.
5. Place a 200g calibration weight in the centre of the weighing tray.
6. The display will flash PASS and your scale is now calibrated.

Information

• Keeping any sized calibration weight on hand will allow you to periodically test your scale for accuracy. We recommend keeping a 200g calibration weight stored with your scale so you can perform recalibration if required.
• Do not exceed the scales maximum capacity.
• Avoid exposure to extreme heat or cold. Scales perform best at room temperature. If temperatures have changed dramatically, recalibration may be necessary.
• Calibration and adjustment are performed at the factory. While recalibration is not generally necessary, it can be performed with the correct weight by following the instructions included with your scale.
• Before performing calibration, allow your scale to warm up for 30 - 60 seconds.
• Store your scale in a clean, dry location. Dust, dirt, and moisture can accumulate on the weighing sensors and electronics causing innaccuracy or malfunction.
• Always weigh on a flat and level surface free from vibration and drafts. The corner of a room is usually the most stable.
• Gently apply items to be weighed. Do not drop items onto the weighing platform.
• Avoid dropping your scale. Warranty does not cover physical damage or overloading.
• Check the batteries first if you are having any trouble with your scale. This simple step can remedy many scale issues.