THE CUTTING KIT INCLUDES:
- Shredding machine with clamps and feeder
- Extra cutting blades as spare parts
- Brick-press to press tobacco leaf together adjusted to the shredder
- Directions for use & machine details
HOW TO USE THE CUTTING KIT
|1. Moisten the leaves
To form the tobacco leaves and press a brick adjusted for the cutting machine you need 200 -250 grams (7-10 ounces) dry weight leaf. Moisten the leaf by spraying with water, when the leaf is soft enough you wrap them around the wrap-plate and load them on each other into the brick press.
|2-3. The Brick-press
When the brick-press is loaded you put the press plate and clamps in place. Press the leaf by tightening the clamps and leave in press for 2 hours. When pressed enough, divide the brick into three parts ready for the shredding machine.
|4. The Cutting machine
Fasten the machine to a workbench or table. Insert one piece of brick into the funnel and press down with the wooden feeder and start to turn the crank. If the strands are to thick you reduce the pressure on the feeder or if they are to thin, you increase the pressure.
|5. Drying tobacco
Shredded tobacco have to dry down to moisture for smoking tobacco. Spread out the tobacco in an even layer on a cardboard or newspaper. Drying time depends on temperature, ventilation and humidity.
You can also view the instructions included with this product here (Instructions will open in a new window).
|Phone:||0800 942 534|
Request More Information
Details of the product above will be automatically included with your enquiry.